//E253: 2018 Super Random Prepper Gear Show

E253: 2018 Super Random Prepper Gear Show

It’s the time of year where I review gear purchased in the last year. These are things I’m using, playing with, loving, and hating, in some cases.

  • Subscribe to ITRH on iTunes
  • Subscribe to ITRH on Android
  • Subscribe to ITRH on Stitcher
  • Subscribe to ITRH on YouTube
  • Subscribe to ITRH on Overcast
  • Subscribe to ITRH on iHeart Radio

Items Reviewed and Episode Resources:

By |2018-08-02T14:42:23+00:00April 23rd, 2018|Urban Survival Podcast Episodes|3 Comments

About the Author:

In his free time, Aaron enjoys hogging the remote, surfing, scotch, mental masturbation and debate over philosophical topics, and shooting stuff--usually not all at the same time.

3 Comments

  1. Brian April 25, 2018 at 5:56 pm - Reply

    If you’re a little hesitant to use Loctite consider putting a dab or two of high temp RTV on the treads of your barrel before screwing on the thread protector.
    Back when I rode motorcycles a lot this was a fix I would use if I had a troubled bolt or nut that liked to back itself out do to the vibrations from the bike. The RTV never really gets “hard” so it is easy to remove when need be and most times the little extra adhesion it provided was adequate to fix the problem.

    Plus its easy to do and if it doesn’t work you can always try the Loctite later.

    I’m also a big fan of the O-lights. I carry a S1A Baton everyday. The only downside I have found is the temptation to use the magnetic base may cause you to attach it to the outhouse door frame to provide light while your helping your 3 year old do his business and then forget you left it there until you’re already home from the campground.

    • Aaron Frankel April 25, 2018 at 5:59 pm - Reply

      Thank you for the great tip, Brian. I’m going to get on that right now.

      And thank you for the heads up on the cautioned magnet use. It would be shitty to forget it in the outhouse. 😉

      • Brian June 28, 2018 at 12:06 pm - Reply

        Aaron,
        Did you ever have a chance to try the RVT on your thread protector?
        How’d it work out?

Leave A Comment